Feature Summary DE2-TIGER
|
Form Factor
|
PMC Mezzanine Card 149.0 x 74.0mm Single Size CMC Envelope
IEEE P1386.1
|
Controller
|
PCI to 4-port Serial ATA (SATA) host controller (Silicon Image), SATALink 1.5Gbps
|
SATA Port Assignment
|
-
Channel 0 available either via on-board connector option SATA-0,
or dedicated to the on-board SATA to Parallel ATA bridge
(option for 1.8-inch IDE on-board hard disk drive)
-
Channel 1 available either via on-board connector option SATA-1i (i=internal usage),
or accessible via SATA-1e (e=external) front bezel SATA connector (option)
-
Channels 2 & 3 available either via on-board connectors SATA-2 & SATA-3 (option),
or channels 2 & 3 optionally routed to P1386 PMC connector P4 for rear I/O usage
|
PCI Interface
|
32-bit, 33/66MHz, P1386 PMC connectors P11/P12
|
BIOS
|
On-board Flash, non-RAID or RAID versions, programming tool available for BIOS update
|
Drivers/Software
|
Windows® 2000, Windows® XP, Linux and Novell Netware, Software RAID
(Level 0 = striping , 1 = mirroring, 10 = mirrored stripe),
RAID controller function requires changing of standard BIOS to RAID BIOS
(BIOS Flash tool available by download)
|
Typical Power Consumption
|
+3.3V ±5% 0.45A max. (0.9A max. including on-board hard disk)
|
Thermal Conditions
|
-
Operating temperature: 0°C ... +70°C
-
Storage temperature: -40°C ... +85°C
|
Environmental Conditions
|
-
Humidity 5% ... 95% non condensing
-
Altitude -300m ... +3000m
-
Shock 15g 0.33ms, 6g 6ms
-
Vibration 1g 5-2000Hz
|
MTBF
|
0.4 * 106h
|
Option
on-Board Hard Disk Drive
|
20GB .. 80GB, e.g. Toshiba 1.8-inch embedded drive MK3006GAL 30GB
Ultra ATA/100 4200RPM, average seek time 15ms
Low power 3.3V 1.1W seek, 0.4W active idle
High reliability MTTF 300.000h
Vibration (operating) 2g 15-500Hz
Shock (operating) 500g 2ms half sine wave
|